Showing products 31–60 of 67. ← Back to main products page
Corrugated or rifled titanium tubes for enhanced heat transfer in heat exchangers.
Specialized titanium tubing for shell-and-tube and plate heat exchanger assemblies.
Hubbed flanges welded directly to pipe — commonly selected for higher-pressure and demanding piping applications, though actual suitability depends on design standard, pipe size, operating temperature and pressure class.
Slip-on flanges — lower cost than weld neck, suitable for moderate-pressure applications.
Solid disc flanges used to blank off pipeline ends — rated to the same pressure class as mating flanges.
Threaded flanges for low-pressure, non-critical services where welding is not desired.
Socket weld flanges for small-bore high-pressure piping — fillet-welded assembly.
Lap joint flanges paired with stub ends — ideal for systems requiring frequent disassembly.
90° and 45° long- and short-radius titanium elbows for directional changes in piping.
Equal and reducing titanium tees for line branching and manifold connections.
Concentric and eccentric titanium reducers for size transitions in piping systems.
Dished, flat and hemispherical titanium caps to close the end of a tube or pipe run.
Stub ends (butt-weld ends) paired with lap joint flanges — not the same as lap joint flanges themselves.
Hex socket drive cap screws — the most common titanium fastener for precision assembly.
Hexagon head bolts — full thread (DIN 933) and partial thread (DIN 931) variants.
Countersunk hex socket drive screws for flush-surface assembly requirements.
Standard hex nuts in matching titanium grades for bolted assemblies.
Plain flat washers for bolted and screwed assemblies — grade matched to fasteners.
Phillips drive pan head (DIN 7985) and countersunk (DIN 965) machine screws.
Torx (star drive) screws in pan head and countersunk configurations for high-torque precision assembly.
Button head hex socket drive screws for low-profile, visually clean assembly.
Socket set screws — flat point (DIN 913), cone point (DIN 914), dog point (DIN 915) and cup point (DIN 916).
Double-ended stud bolts — equal thread (DIN 938), unequal (DIN 939) and fully threaded stud stock (DIN 975).
Flange head bolts and flange serrated nuts for high-pressure flange assemblies.
Self-tapping Phillips pan head screws for sheet metal and thin-section assembly.
Ruthenium oxide MMO coated titanium anodes — the primary coated anode product line for chlorine, water treatment and general electrochemical use.
Iridium oxide MMO coated titanium anodes — stable in oxygen-evolving environments and high-anodic-potential processes.
Platinum metal coated titanium anodes — thin or thick platinum layer applied to titanium substrate for specialty electrochemical processes.
β-PbO₂ (lead dioxide) electrodeposited onto titanium — high-voltage, long-life anodes for wastewater treatment and electrosynthesis.
Palladium or palladium-based alloy coated titanium anodes for specialized electrochemical processes requiring specific electrocatalytic properties.
Send us your drawing, dimensions, grade or application — we will respond with a tailored quotation.
Request a Quote