Comprehensive rolled flat titanium products — plate and sheet, foil, strips & coils and discs & circles — engineered for chemically aggressive environments and demanding structural fabrication.
Rolled flat products — plate and sheet — the starting point for most fabricated titanium equipment.
Commercially pure titanium Grade 1 sheet — softest CP grade for chemical equipment, tanks and general fabrication.
Most widely used CP titanium plate Grade 2 for pressure vessels, heat exchanger shells and structural fabrication.
Ti-6Al-4V (Grade 5) alloy plate — high strength-to-weight for aerospace-grade structural applications.
Precision-drilled titanium tubesheet blanks for shell-and-tube heat exchangers, produced from plate stock.
Pressed and corrugated plate heat exchanger plates for plate-and-frame heat exchanger assemblies.
Explosive-bonded titanium-copper clad plates combining titanium corrosion resistance with copper thermal and electrical properties.
Very light-gauge rolled flat titanium for laminates, barriers, chemical components and electrical parts.
Narrow rolled flat titanium — coils or cut-to-length for forming, welding and fabrication.
Flat round blanks cut or machined from plate or sheet stock to your drawing or dimension.
ASTM B265 is the primary specification for annealed titanium and titanium alloy strip, sheet and plate. Plate, sheet and strip can be supplied to applicable ASTM B265 requirements. For foil, applicable standards and acceptance conditions are confirmed based on thickness, product definition and purchase requirements.
| Grade | UNS | Material |
|---|---|---|
| Grade 1 | R50250 | Commercially pure titanium (CP Ti) |
| Grade 2 | R50400 | Commercially pure titanium |
| Grade 3 | R50550 | Commercially pure titanium |
| Grade 4 | R50700 | Commercially pure titanium |
| Grade 5 | R56400 | Ti-6Al-4V (6% aluminum, 4% vanadium) |
| Grade 7 | R52400 | CP Ti + 0.12–0.25% palladium |
| Grade 9 | R56320 | Ti-3Al-2.5V (3% aluminum, 2.5% vanadium) |
| Grade 11 | R52250 | CP Ti + 0.12–0.25% palladium |
| Grade 12 | R53400 | Ti-0.3Mo-0.8Ni (0.3% molybdenum, 0.8% nickel) |
| Grade 16 | R52402 | CP Ti + 0.04–0.08% palladium |
| Grade 17 | R52252 | CP Ti + 0.04–0.08% palladium |
| Grade 23 | R56407 | Ti-6Al-4V ELI (extra low interstitial) |
Simplified summary of intentional alloying elements. Full limits (Fe, O, N, C, H, Ti balance) in ASTM B265 Table 8.
| Grade | Al | V | Pd | Mo | Ni | Ti |
|---|---|---|---|---|---|---|
| 1–4 (CP Ti) | — | — | — | — | — | Balance |
| 5 | 5.5–6.5 | 3.5–4.5 | — | — | — | Balance |
| 7 | — | — | 0.12–0.25 | — | — | Balance |
| 9 | 2.5–3.5 | 2.0–3.0 | — | — | — | Balance |
| 12 | — | — | — | 0.2–0.4 | 0.6–0.9 | Balance |
| 23 | 5.5–6.5 | 3.5–4.5 | — | — | — | Balance (ELI) |
Tensile and yield values are ASTM B265 mandatory requirements for annealed strip, sheet and plate at room temperature. Bend radius requirements also apply per grade.
| Grade | UTS min (MPa) | 0.2% Yield min (MPa) | Elongation min (%) | Bend Radius (T) |
|---|---|---|---|---|
| 1 | 240 | 138 | 24 | 1.5T |
| 2 | 345 | 275 | 20 | 2T |
| 3 | 450 | 380 | 18 | 2T |
| 4 | 550 | 483 | 15 | 2T |
| 5 | 895 | 828 | 10 | 3T |
| 7 | 345 | 275 | 20 | 2T |
| 9 | 620 | 483 | 15 | 2.5T |
| 12 | 483 | 345 | 18 | 2.5T |
| 23 | 860 | 795 | 10 | 3T |
Values are typical for annealed material at room temperature. They are provided for design reference and are not test requirements of ASTM B265. Actual values may vary slightly by heat and processing.
| Property | CP Ti (Grades 1–4) | Grade 5 / 23 (Ti-6Al-4V) | Grade 9 (Ti-3Al-2.5V) | Grade 12 (Ti-0.3Mo-0.8Ni) |
|---|---|---|---|---|
| Modulus of Elasticity (GPa) | ~114 | ~110 | ~113 | ~107 |
| Thermal Conductivity (W/m·K) | ~21 | ~7.2 | ~16 | ~19 |
| Thermal Expansion (20–100 °C, 10⁻⁶/°C) | ~8.6 | ~9.2 | ~9.0 | ~9.4 |
| Melting Range (°C, approx.) | 1660–1680 | 1648–1660 | 1650–1670 | 1660–1680 |
| Grade Group | Density (g/cm³) |
|---|---|
| CP Ti (Grades 1, 2, 3, 4, 7, 11, 16, 17) | ~4.51 |
| Grade 5 / Grade 23 (Ti-6Al-4V) | ~4.43 |
| Grade 9 (Ti-3Al-2.5V) | ~4.48 |
| Grade 12 (Ti-0.3Mo-0.8Ni) | ~4.53 |
Typical reference values. Not mandatory requirements specified by ASTM B265.
Grade 1 · Grade 2 · Grade 4 · Grade 5 · Grade 7 · Grade 9 · Grade 12 · Grade 23
Stock availability varies by thickness, width, length and quantity. Not every stocked grade is held in every product form (plate, sheet, foil, strip, disc).
Grade 3 · Grade 11 · Grade 16 · Grade 17 · Other specialty grades per request
Subject to material availability, order quantity and processing arrangement.
For grades or specifications outside our standard stock range — including special thicknesses, widths, lengths, surface finishes, heat treatment conditions or testing requirements — our team reviews each inquiry against current material availability, processing capacity and order requirements. Please include your required grade, product form, dimensions, quantity, applicable standard and any special documentation needs when contacting us.
Dimensions below indicate our typical supply scope for titanium plate, sheet, foil, strip and disc forms. Exact availability depends on grade, order quantity and current stock.
| Product Form | Thickness Range | Typical Width | Typical Length | Supply Mode |
|---|---|---|---|---|
| Titanium Plate | 3.0 – 80 mm+ | 1000 – 2000 mm | 2000 – 6000 mm | Stock & custom cut-to-size |
| Titanium Sheet | 0.5 – 6.0 mm | 1000 – 1500 mm | 2000 – 4000 mm | Stock & custom cut-to-size |
| Titanium Foil | 0.01 – 0.8 mm | 30 – 300 mm | Coils or cut lengths | Custom, subject to grade & size |
| Titanium Strip | 0.3 – 6.0 mm | 20 – 300 mm | Coils or cut-to-length | Custom, subject to stock & arrangement |
| Titanium Discs & Circles | From plate/sheet stock | Diameter 20 – 800 mm+ | Cut-to-drawing | Custom from stock plate/sheet |
Cut-to-size & Custom Dimensions: We can cut titanium plate, sheet and strip to customer-specified dimensions from available stock. For fully custom dimensions outside the ranges above, please contact us with your exact requirements — thickness, width, length, quantity and grade — and we will review supply options.
Stock vs. Custom: Dimensions listed as typical do not guarantee stock availability in every grade. Some thicknesses or widths may require sourcing or processing arrangement. Please confirm stock before specifying in drawings or purchase orders.
Beyond ASTM B265, the following standards are commonly referenced for titanium flat products in specific industries. Feinuotai supports these specifications where applicable.
Primary flat product specification
Corresponding grade: All grades listed in this page (Grades 1–4, 5, 7, 9, 11, 12, 16, 17, 23)
Applicable form: Titanium plate, sheet and strip (annealed condition).
The base specification for the majority of our plate and sheet supply.
Aerospace — Ti-6Al-4V
Corresponding grade: Ti-6Al-4V (Grade 5)
Applicable form: Sheet and plate products.
Aerospace-grade specification for titanium 6Al-4V flat products for aircraft structural applications. Applies specifically to Grade 5; not all titanium grades fall under AMS 4911 scope.
Medical — CP titanium
Corresponding grade: Unalloyed titanium (Grades 1–4)
Applicable form: Various product forms for surgical implants.
Specification for commercially pure titanium for surgical implant applications. May apply to CP titanium flat products when supplied for medical device manufacturing. Not applicable to alloyed grades.
Medical — Ti-6Al-4V ELI
Corresponding grade: Ti-6Al-4V ELI (Grade 23)
Applicable form: Various product forms for surgical implants.
Specification for Ti-6Al-4V ELI (Grade 23) for orthopedic, spinal, trauma and dental device manufacturing.
Medical — Ti-13Nb-13Zr
Corresponding grade: Ti-13Nb-13Zr
Applicable form: Surgical implant material (wrought).
Specification for Ti-13Nb-13Zr alloy for surgical implant applications. Ti-13Nb-13Zr is a near-beta titanium alloy developed for medical use.
Aerospace — Ti-15V-3Al-3Cr-3Sn
Corresponding grade: Ti-15V-3Al-3Cr-3Sn (Ti-15333)
Applicable form: Cold-rolled sheet and strip.
Aerospace specification for metastable beta titanium alloy Ti-15333 sheet and strip in solution-treated or solution-treated and aged conditions.
Important — scope clarification: Not all six specifications apply to every titanium plate or sheet product. Each standard covers specific grades, product forms and industry use cases. Requesting a specific standard does not imply Feinuotai holds a third-party certification for that standard — it specifies the material properties and documentation to which the supply should conform.
Beyond the standard grades covered by ASTM B265, Feinuotai evaluates requests for specialty titanium alloys on a case-by-case basis. All items below are supplied subject to material availability, order quantity and processing arrangement.
Metastable beta titanium alloy
A high-strength beta titanium alloy with good formability in the solution-treated condition and excellent strength after aging. Used in aerospace structural components, springs, fasteners and high-performance applications. Plate and sheet supply evaluated per inquiry.
Near-alpha high-temperature alloy
A near-alpha titanium alloy offering good elevated-temperature strength and creep resistance up to approximately 540 °C (1000 °F). Used in gas turbine engine components and high-temperature structural applications. Plate and sheet supply evaluated per inquiry.
Medical near-beta alloy (ASTM F1713)
A near-beta titanium alloy originally developed for medical implant applications, covered by ASTM F1713. Ti-13Nb-13Zr offers a low modulus of elasticity suitable for orthopedic implants. Supply evaluated per inquiry.
Custom grade evaluation
Additional titanium alloys — including beta alloys, near-alpha alloys and nickel-titanium (NiTi) — may be available through our supply network. If your project requires a specific titanium alloy not listed above, contact our team with your required grade, product form, dimensions, quantity and application. We will review material availability and supply options.
Documentation, inspection and traceability matters to consider when procuring titanium plate and sheet.
Mill test certificates covering chemical analysis and mechanical properties can be supplied with your order. Certificate format and scope are confirmed per inquiry.
Independent third-party inspection (TPI) by recognized agencies can be arranged and coordinated. TPI scope, agency and timing are confirmed per project.
Our team provides order progress updates and arranges delivery — including export packaging, documentation and shipping coordination — according to your requirements.
Heat numbers and material identification are marked on titanium plate and sheet per ASTM B265 marking requirements. Traceability records are maintained to support MTC documentation.
Beyond material supply, Feinuotai supports titanium plate and sheet customers with processing services — in-house and coordinated external.
In-house processing is carried out at our Baoji facility under coordinated production scheduling. Available capacity and lead times are confirmed per order.
For processing outside our in-house capacity, Feinuotai coordinates with qualified external partners. Our team remains responsible throughout each stage: technical requirement confirmation, processing arrangement, production follow-up and delivery coordination.
Custom Fabrication from Plate & Sheet: Tubesheet blanks, pressure vessel components, heat exchanger parts and custom welded assemblies can be produced from plate and sheet stock. See Custom Machined & Fabricated Parts for details.
Standard offerings include commercially pure Grade 1, 2, 3 and 4; Grade 5 (Ti-6Al-4V) for high-strength applications; Grade 7 (Ti-0.2Pd), Grade 9 (Ti-3Al-2.5V) and Grade 12 (Ti-0.3Mo-0.8Ni) for enhanced corrosion resistance. Other grades including Grade 11, 16, 17 and specialty alloys are evaluated subject to material availability and order requirements.
Titanium plate is generally supplied from 3 mm (0.118 in) and above. Sheet covers thinner gauges down to approximately 0.5 mm (0.020 in), while foil extends to thinner ranges below 0.2 mm. Exact thickness availability depends on grade, width and rolling capacity — please inquire with your specific dimensions.
Yes — ASTM B265 is the standard specification for titanium and titanium alloy strip, sheet, and plate. For other product forms such as tubes, bars, forgings or fasteners, separate specifications apply (ASTM B861 for tubes, ASTM B348 for bars, etc.).
Mill test certificates (MTC) covering chemical analysis and mechanical properties are supplied with every order. Certificate format and scope are confirmed per inquiry to align with project or specification requirements.
Yes — plate and sheet can be cut to customer-specified dimensions, sheared, slitted or blanked. Additional processing such as rolling, bending, welding or CNC machining can be coordinated through our fabrication partners. Visit Custom Machined & Fabricated Parts for machined and welded component capabilities.
Send us your requirements — material grade, thickness, width, length, quantity, applicable standard and any special documentation or processing needs. Our team will respond with a tailored quotation and material recommendation.
Helpful details to include: Material Grade · Dimensions (thickness × width × length) · Required Quantity · Applicable Standard (e.g., ASTM B265, AMS 4911) · Drawings (if custom) · Application Requirements (e.g., corrosion environment, temperature, pressure)
Send Inquiry