Square and rectangular titanium tubing (box sections) for structural fabrication, corrosion-resistant frames and support structures where the box section offers high stiffness-to-weight ratio.
| Parameter | Standard / Industry Reference Range | Custom Supply Range | Regular Stock Range |
|---|---|---|---|
| Outer Dimensions | Common square and rectangular sections per structural practice | Custom width x height per drawing | Common sizes may be available from stock |
| Wall Thickness | Referenced against box section dimensions | Final wall thickness confirmed against section dimensions and order requirements | Common wall thicknesses for stocked sections |
| Length | 2 – 6 m production lengths typical | Cut lengths and fixed lengths per order | 2 – 6 m random lengths for stocked sizes |
| Production Route | Welded fabrication (primary route for large sections) or drawn forming | Confirmed against section dimensions and grade | Route confirmed per stocked size |
Grade 1 (CP Ti), Grade 2 (CP Ti). Common sizes and wall thicknesses may be available from mill stock.
Grade 5 (Ti-6Al-4V) and other titanium or titanium alloy grades. Production feasibility reviewed per order against section dimensions, wall thickness and forming route.
Square and rectangular titanium tubes have a non-round cross-section. ASTM B338 / B337 are standard specifications for round seamless and welded titanium tubes intended for heat exchanger and process piping service. These round-tube standards do not directly cover non-round cross-sections.
For square and rectangular titanium tubes, applicable requirements are evaluated against the specific product form, production route (welded vs. drawn), grade and order specification. Test standards and tolerance requirements are agreed for each order. Not every square or rectangular section is covered by a dedicated titanium product standard.
Titanium box sections for corrosion-resistant frames, machine bases, support towers and load-bearing members where titanium's corrosion resistance reduces maintenance and extends service life.
Lightweight corrosion-resistant guard rails, safety barriers and handrail systems for marine, chemical and industrial facilities.
Titanium box sections for marine structures, offshore platforms and coastal facilities where saltwater corrosion resistance is required.
Titanium structural members used in chemical plants, plating lines and process equipment support structures where the surrounding environment is corrosive.
No. ASTM B338 and B337 are standard specifications for round seamless and welded titanium tubes intended for heat exchanger and process piping service. Square and rectangular titanium tubes have a non-round cross-section and are not directly covered by these standards. Applicable requirements are evaluated against the specific product form, production route and order specification.
Common square and rectangular sections in Grade 1 and Grade 2 titanium may be available from mill stock. Specific dimensions, wall thicknesses and grades should be confirmed at inquiry time. Non-standard sections and alloy grades are produced to order.
Square and rectangular titanium tubes can be produced by two main routes. The welded route forms flat titanium plate or strip into a rectangular shape and welds the seam. The drawn route pulls a preform through shaped dies to reduce it to final dimensions. The specific route depends on the section dimensions, wall thickness and grade.
Yes. Titanium box sections can be bent, welded, cut, drilled and machined depending on the grade, wall thickness and required operation. Feasibility should be confirmed per inquiry, particularly for tight-radius bending and alloy grades.
To receive an accurate quotation, please provide as many of the following details as possible: outer width, outer height, wall thickness, grade, required length, quantity and intended application. If you have a drawing or section table, please share it with our sales team.
Helpful details: Outer Width x Height, Wall Thickness, Grade, Length, Quantity, Production Route (if known), Application, Drawing
Send Inquiry
