Titanium angle bars — L-shaped or angular cross-section titanium profile stock for structural assemblies, frames, bracketry and reinforcement.
Titanium angle bars — L-shaped or angular cross-section titanium profile stock for structural assemblies, frames, bracketry and reinforcement.
Product Overview — Titanium angle bars are L-shaped or angular cross-section titanium profile stock. They find application in structural assemblies, frames, bracketry, reinforcement and any situation where a right-angle or angular cross-section is functionally appropriate. Angle bars are less commonly produced as standard-stock titanium items than round, square or flat bars, so every inquiry is reviewed against mill capability and current production programmes.
Long-form note for procurement: Titanium angle bars sit at the less-common end of the titanium bar product family. Most industrial titanium structural assemblies are built from round or flat bar machined or bent into shape, or from welded plate sections. Angle bar stock is chosen when an as-rolled L-section is preferred for geometric or cost reasons. When inquiring, please state leg sizes, thickness, length, grade and whether equal-leg or unequal-leg angle is required.
Grade 1, 2, 3, 4 (CP titanium), Grade 5 (Ti-6Al-4V), Grade 7, 9, 11, 12, 16, 17 and Grade 23 (Ti-6Al-4V ELI). Feasibility per leg size / thickness combination and grade evaluated per inquiry.
Angle bar is not a standard stocked titanium product. Every angle bar supply is sourced or produced to order. Flat bar or plate stock may be bent or welded into angle form as an alternative.
ASTM B348 / B348M does NOT cover titanium angle bars.
ASTM B348's formal scope is titanium round bars and billets. It does not cover L-shaped, angular or other non-round bar profiles including angle bars. Any applicable standard for titanium angle bars would be mill-specific, customer-specified, or derived from general titanium product specifications — the correct standard and supply condition are confirmed at inquiry time.
If your project requires a particular engineering code or standard reference, please state this in the inquiry and we will confirm whether we can supply angle bars under that specification or suggest an alternative starting form (flat bar bent to angle, welded plate assembly, etc.) that can be supplied against a recognised standard.
Alternative starting forms to consider:
These alternatives can often be supplied faster than rolling a dedicated angle bar, and they can be quoted against recognised standards such as ASTM B265 for the starting stock.
L-section angle stock for frames, supports and bracketry where a right-angle profile is functionally appropriate.
Angular reinforcement for plate and sheet assemblies where the angle form provides additional stiffness.
Angle bar sections assembled into welded frames and supports.
ASTM B348 does NOT apply to titanium angle bars. ASTM B348 covers titanium round bars and billets only. It does not cover L-shaped, angular or other non-round bar profiles. The correct standard for your titanium angle bar supply — if a standard applies — is confirmed at inquiry time. If your project needs a recognised standard, we may suggest an alternative starting form (flat bar bent to angle, welded plate assembly) that can be quoted against a standard like ASTM B265.
No — titanium angle bars are not a standard stocked product. Every angle bar supply is sourced or produced to order. Please inquire with your leg sizes, thickness and grade and we will confirm whether production is feasible or suggest an alternative form.
Flat bar bent to L-section, two flat bars welded into an angle assembly, or angle form machined from plate stock are the main alternatives. These can often be supplied faster than rolling a dedicated angle bar and can be quoted against recognised standards.
Tell us leg sizes, thickness, length, grade and whether you need equal or unequal leg angle — we will confirm feasibility and supply route or suggest an alternative form.
Helpful details: Leg Sizes, Thickness, Length, Grade, Equal / Unequal Leg
Send Inquiry
