Flat or oval profile titanium tubes -- non-round cross-section with high surface-to-volume ratio for compact heat exchanger and radiator applications.
| Parameter | Supply Reference | Custom Supply Range |
|---|---|---|
| Profile Dimensions | Flat (width x height outer) or oval (major x minor axis per drawing) | Custom profile dimensions per heat exchanger design |
| Wall Thickness | Confirmed against profile dimensions and grade | To Be Confirmed Against Product Requirements |
| Length | Per heat exchanger design requirement | Custom lengths per application |
| Production Route | Welded fabrication or drawn forming, confirmed per profile | To Be Confirmed Against Product Requirements |
Grade 1 (CP Ti) and Grade 2 (CP Ti) are the most common grades for flat and oval heat exchanger tubes. Availability depends on the specific profile dimensions.
Grade 5 (Ti-6Al-4V) and other titanium or titanium alloy grades. Production feasibility reviewed per order against profile dimensions, wall thickness and forming route.
Titanium flat and oval profile tubes have a non-round cross-section. ASTM B338 / B337 are standard specifications for round seamless and welded titanium tubes intended for heat exchanger and process piping service. These round-tube standards do not directly cover non-round profile tubes.
For flat and oval titanium tubes, applicable requirements are evaluated against the specific product form, production route and order specification. Tolerance requirements for profile dimensions, wall thickness and straightness are agreed for each order against the heat exchanger design requirements.
Flat and oval titanium tubes for compact heat exchanger designs where maximizing heat-transfer surface within a constrained volume is the primary objective.
Titanium radiator tubing for marine, industrial and chemical applications where corrosion resistance and thermal performance are both critical.
Flat titanium tubes for compact process coolers and specialty heat exchange equipment in corrosive chemical environments.
No. ASTM B338 and B337 are standard specifications for round seamless and welded titanium tubes intended for heat exchanger and process piping service. Flat and oval profile tubes have a non-round cross-section and are not directly covered by these round-tube standards. Applicable requirements are evaluated against the specific product form and order specification.
Flat titanium tubes have a rectangular cross-section (width x height outer dimensions). Oval titanium tubes have an elliptical cross-section defined by major and minor axes. Both are non-round profile tubes designed to increase heat-transfer surface relative to round tubes.
Grade 1 and Grade 2 titanium are the most common grades for flat and oval heat exchanger tubes. Grade 5 and other alloy grades can be used where higher mechanical strength or pressure capability is required, but feasibility must be reviewed per order against the profile dimensions and forming route.
Yes, flat and oval titanium tubes can be bent and coiled depending on the grade, wall thickness and required bend geometry. Minimum bend radius and flattening limits are confirmed against the specific profile and grade. Feasibility should be reviewed per inquiry.
To receive an accurate quotation, please provide as many of the following details as possible: profile dimensions (width x height for flat tubes, major/minor axes for oval tubes), wall thickness, grade, required length, quantity and intended application. If you have a heat exchanger drawing showing the tube geometry, please share it with our sales team.
Helpful details: Flat (Width x Height) or Oval (Major x Minor), Wall Thickness, Grade, Length, Quantity, Application, Drawing / Specification
Send Inquiry
